Reasonable and effective reduction of the processing cost of injection moulds can effectively improve the economic benefits of enterprise production, effectively reduce the production cost of enterprises, and is conducive to the promotion of market competitiveness of enterprises and products.
Firstly, the injection moulds should be selected reasonably.
Before the production of products, carefully selecting and designing reasonable injection moulds is the most basic way to reduce costs. Different die design structures have different requirements for product materials, which are good or bad naturally. Excellent die has high yield, less waste and low natural production cost.
Secondly, reasonable processing technology should be adopted.
For the same product, the quality and quantity of raw materials required are different with different production and processing technologies. According to the characteristics of the products, on the premise of meeting the quality requirements, the production cost can be effectively reduced by using the method of improving the processing technology.
Then, adopt scientific and reasonable management在生產過程中，采用科學合理的管理方式。強化成本核算，在生產、供應、銷售以及財務等各個環節要加強管理。把生產成本中的原材料、輔助材料、燃料、動力、工資、制造費、行政費等，每一項費用細化到單位產品成本中，合理的規范管理，嚴禁浪費。
In the process of production, scientific and reasonable management mode should be adopted. Strengthen cost accounting and strengthen management in production, supply, sales and finance. The cost of raw materials, auxiliary materials, fuel, power, wages, manufacturing costs, administrative fees in production costs are refined into unit product costs. Reasonable management is standardized and waste is strictly prohibited.
Enterprises reduce all kinds of unnecessary waste in each link, so as to achieve the purpose of reasonable storage and use of materials, reduce costs and improve efficiency. This not only guarantees the reasonable needs of production, but also reduces the waste of funds.
In recent years, the quality and quantity of injection moulds in our country have developed rapidly, but compared with the advanced technology abroad, the technical level of most enterprises in our country still needs to be improved. At present, compared with the advanced technology level abroad, the following problems exist in the injection mould industry in China:
First, the contradiction between supply and demand is difficult to solve in the short term.
The domestic market satisfaction rate of injection moulds has been less than 74%, among which the large, precise and long-life moulds have lower satisfaction rate. At present, the moulds of developed industrial countries are speeding up their transfer to China, and more and more international purchases are being made. Market demand is strong, production development is still difficult to keep up for a while, and the situation of shortage of supply and demand will continue for some time.
Second, unbalanced industrial development雖然個別企業的產品已達到或接近先進水平，但是總體來看，模具的精度、生產周期、使用壽命等指標與國外相比尚有較大的差距，產業發展總體水平較低。
Although the products of individual enterprises have reached or approached the international advanced level, on the whole, the precision, production cycle, service life and other indicators of the die still lag behind those of foreign countries, and the overall level of industrial development is relatively low.
Third, the overall technological level is backward.
After the technological transformation in recent years, some enterprises have advanced technology and equipment, and even some of the three-capital enterprises have not lagged behind foreign countries in equipment level. However, compared with most enterprises, the process equipment is still relatively backward. More importantly, the poor ability of organizational coordination of enterprises makes it difficult to integrate or mobilize social resources.
Fourth, the lack of innovation capability in enterprise development首先技術人員比例低、水平不夠高，其次科研開發投入少。更重要的是大多數企業觀念落后，對創新和開發沒有足夠的重視。
Firstly, the proportion of technicians is low and the level is not high enough, secondly, the investment in scientific research and development is low. More importantly, most enterprises are backward in concept and do not pay enough attention to innovation and development.
Injection mould enterprises should not only pay attention to product development, but also pay attention to product innovation. Only when enterprises have strong strength in technical personnel and technological innovation, and can accurately grasp the individual needs of customers in the first time, can they develop steadily and rapidly.